Stud finders can detect the wall in multiple locations in one fell swoop, and instantaneously illuminate display elements in front of the device. Fetanten TS005 Stud Finder Review presents a model designed to work faster for instant detection of hazards lurking beneath walls with less error-prone and scalpel-precision readings.
The finder integrates four distinct scanning modes for circuits, AC, woods, metals and deeply buried objects. Its AC detection mode renders pinpoint-precision with a range of +/-1%.
Fetanten TS005 Stud Finder Review | 5 Major Features
1. 4-IN-1: Multi-Scanner Edge-Finding
The Fetanten TS005 Stud Finder multi-scanner edge-finding stud-sensor detector with LCD zeroes in edges or centers of metal, rebar behind walls, wood, joist, wooden beams, floors, and ceilings as well as subsisting live AC wire.
TS005 can identify the smaller profile of electricity lattice with high precision AC detection. Multi-mode detection lets you peer beneath walls without muddling through a pitfall.
2. Depth of Drywall
For dry walls, the TS005 pinpoints studs instantly and accurately. Fetanten TS005 pins down the edgings and center of wooden beam and joist in drywall deeply ensconced up to 1.2”. Metal mode finds parts like the pipe, nail, aluminum, rebar, and copper situated particularly deep up to a maximum of 1.57”.
Tweak to the DEEP mode to find wood or metal parts nestled at a depth of up to 1.77”. 85~240 volt AC homes in voltage or live electrical lines located particularly up to 2.36”.
You get the ball rolling and hone in the exact location of live electrical wiring by screening a wall, or other tangible surfaces for metallic parts inside like a pipe for a gas network or rebar obscured in a concrete block.
3. Graphical LCD & Continuous Sounds
The inbuilt graphical display boasts arrows that adjust location and shape to accurately indicate the existence of detected objects as you probe with the finder. With triple buttons on the front, the TS005 makes its use a piece of cake right out of the box.
You can mark the site of the edges of a stud with clockwork accuracy rather than second-guess the location. Easy-read graphical LCD and unremitting BI-BI-BI sounds tell again on the stud’s exact location. Auto-power-off cuts it out if goes inactive for 60 seconds.
4. Intuitive Operability
STEP 1: Turn on the detector, and select your preferred scan mode
STEP 2: Stick the finder flat on a wall, then press and cling to the “PUSH” button at the edge, and hold the unit still for a full calibration (1-to-2 seconds). At the end of calibration, the tool will make a short beep and clear display bars in a single stroke.
STEP 3: While still gripping the “PUSH” button, locate the device on the target surface for scanning to detect stud edges, AC wire, metal parts, pipes and much more.
STEP 4: When the detector senses an object, it will beep nonstop, and a peck shape pops up on the LCD screen.
5. Unlimited Home Renovation & Decoration Applications
The 4-in-1 TS005 multi-scanner stud sensor renders a multipurpose and hands-on tool ideal for home renovation and decoration. For home decoration, it’s useful for drilling, jewelry fixing, and painting to avoid Livewire when drilling directly.
The soft and ergonomic grip allows you to probe over a surface for a stud, just inscribe a mark at the stud’s initial and ending point.
It pins down edges and center of wall studs, metal pipes, rebar beneath walls, ceilings or floors, wooden beam, wood studs, joist and “live” AC wire. It’s a well-oiled hand tool that brings down-to-earth value in the smallest packages during home renovations or bedecking.
Check The Latest Price on Amazon, Now!
Why should you use Fetanten TS005 Stud Finder?
1. Multi-Scanner Stud
Fetanten TS005 homes in AC Livewire, metal, wooden beam, and examines the depth of a wall for density fluctuations.
It comes with all bells and whistles with the ability to spot the edgings of a stud, deep scan, precise AC probe, and extra scanning modes. Detect live electrical wiring hidden in the wall and steer clear of danger or range in their exact location.
2. Convenient Auto-Actions
The TS005 comes with a button tone and low battery indicator for more convenience. Its auto-off deactivates the device if it stays without running for 60 seconds. The features preserve battery life and make it easier to maintain.
3. Different Modes
The TS005 has a STUD mode to scan wood, joist in drywall up to 2”. The metal mode identifies metal pipes, rebar, nail, aluminum, or copper up to 1.57” deep. The DEEP mode probes to a depth of 1.77” and AC setting for AC Livewire propel it to the catbird’s seat in the niche.
4. Easy-To-Use
Equipped with three buttons, the TS005 offers highly precise operations. The push buttons allow you to select your desired probe and audible warnings hark back to a stud’s location. Graphical LCDs render clockwork accuracy.
5. Handy and Versatile
The handheld detector helps you locate the framing studs buried in walls. Most homeowners do not have a drafting plan that allows identifiable studs in a home. It works with wooden beams, metal and other thick-seam objects found in walls with live wire sensors.
- Equipped with four modes, viz. metal, AC live wire, DEEP and stud
- Comes with a low battery indicator and auto-off that activates every 60 seconds of dormancy
- Graphical LCD and beeping signal for added versatility
- Intuitive and easy-press buttons for seamless operation
- Superior scanning technology for ultra-accurate depth of drywall readings
- 85~240 volt AC for voltage or live electrical lines with a +-1% accuracy range
- Sound beeps remind you of a stud’s location
- Ideal stud sensor for home renovations and decorations
- It doesn’t work on lath, direct current or plaster walls
- Detection depth fluctuations due to wall humidity, corrosion or conditions that shroud a probe
FAQ – Frequently Asked Questions
- Do you get a battery with the device?
No, the battery (1x9V) battery is not included.
- Will it sense copper shafts beneath floorboards?
Yes, but you have to take into account the depth range.
- Will it probe accurately and efficiently on plastered walls?
It’s not up to snuff for plastered walls as indicated by the manufacturer.
- Can it detect AC electric lattice in the wall?
Yes, you should scan horizontally or vice versa.
- It detects studs, metal, or AC, but what does “DEEP” Mode mean?
DEEP type means a Deep scan mode with scalpel-like precision on hard-to-reach targets like metal or wooden beams.
Final Verdict
With a minimalist design and comprehensive detection, Fetanten TS005 Stud Finder Review gives credence to the multi-scanner for decorative construction and renovations. You can grease the skids to pinpoint metal studs, current beneath walls, floors or ceilings, beams and the existence of live AC wires.
Fetanten ensures the coast is clear as it homes in the smallest profile of installation. You can’t play a narrow squeak by going tool-less, a stud finder nips all troubles in the bud.
Leave a Reply